So that should tell us that our SIM is working fine! And we are ready to switch our mode to serial modem now! Then you'll get the home html file giving your status. So you should open a browser, and access. It's probably easiest to make sure the dongle is working by going ahead with this first! But I never had that with the E3531.Īnyway, this HiLink CDC-Ethernet mode means the dongle is all ready to connect to the internet over 2G/3G and you can use PPP now if you want. However, because these dongles do contain data, they may return as a mass storage device instead! That's common for the E303. So this is supposed to be the default mode for the E3531. Now the 12d1 being the vendor ID, and 14dc being the HiLink CDC-Ethernet model/mode ID. I got back for the USB device listed as Huawei Technology Co., the following mode: 12d1:14dc You can see what I got back in the image above! This will return a list of USB devices that are connected, along with their modes. Once you've plugged in the E3531 you should run the following command: lsusb Ok, so once that is done you can insert the SIM into the E3531 and plug it into a USB port on the Raspberry Pi 3! Then you'll know for sure that the SIM is working. So mostly when you buy a SIM the carriers (this is for the UK) want you to activate it using a voice call! So it's easiest to do that with an unlocked phone.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |